]> Protocol-Specific Profiles for JSContact Fastmail
PO Box 234 Collins St. West Melbourne VIC 8007 Australia rsto@fastmailteam.com
IIT-CNR
Via Moruzzi, 1 Pisa 56124 Italy mario.loffredo@iit.cnr.it
art calext JSContact This document defines JSContact profiles, a named subsets of JSContact elements that are supported in context of a contact data exchange protocol or other use case. It aims to facilitate using JSContact in contexts where supporting all of JSContact semantics is not appropriate.
Notational Conventions The key words "MUST", "MUST NOT", "REQUIRED", " SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", " RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 when, and only when, they appear in all capitals, as shown here. The ABNF definitions in this document use the notations of . ABNF rules not defined in this document are defined in either (such as the ABNF for CRLF, WSP, DQUOTE, VCHAR, ALPHA, and DIGIT) or .
Introduction The JSContact contact card data model and format is designed for use in address book applications and directory services. Intended as an alternative to the prevalent vCard data format, it covers vCard core semantics and extensions, and provides a rich model for personal names, postal addresses and localization. All JSContact elements are relevant for some contact card use case and, similar to vCard, implementations are expected to support these elements when exchanging contact card information using protocols such as CardDAV and JMAP for Contacts. In contrast, other protocols and internet standards might require to exchange some contact card information, but not need all of what JSContact provides. outlines how JSContact implementations may ignore unknown JSContact elements, but this only applies to future extensions of ; they are still expected to implement all elements of the core specification. Also, the extensibility of JSContact and the requirement to preserve arbitrary contact elements might not be adequate for some protocols. To make use of JSContact under these circumstances, this document defines a new IANA registry for JSContact that allows to register named subsets of JSContact elements. These subsets are referred to as "JSContact profiles" and are meant to bring the following benefits:
  • Protocol designers might be encouraged to use JSContact, rather than coming up with their own contacts format. This facilitates cross-protocol data exchange and migration.
  • Different protocols use the same IANA registry to express which JSContact elements they support. This facilitates understanding their commonalities and reusing existing profiles.
  • A central registry provides implementors of JSContact libraries with a consistent format documenting which profile supports what elements, rather than having to look up that information from possibly distinctly organized internet drafts.
This document is organized as follows: defines JSContact profiles, illustrates JSContact profiles by example, summarizes the relevant information for IANA to establish the JSContact Profiles registry.
JSContact Profiles A JSContact profile is a named, versioned subset of JSContact properties, value types and values. These JSContact elements MUST be registered in the IANA JSContact registry. A JSContact extension MAY define both a new profile and new properties or other elements, as long as they are registered at the same time. A JSContact profile MUST be registered at IANA (see ). and define how to name and version a JSContact profile, defines how to define the properties supported by that profile. A JSContact object conforms to a profile if all its properties are in the subset of properties defined by that profile and the property values comply with the profile restrictions for that property.
Profile Name This names the profiles, each JSContact profile MUST have a unique name. The name MUST only contain ASCII lowercase alphabetic and numeric characters, optionally separated by a hyphen. Formally, it MUST be a valid "profile-name" defined in the appendix section in .
Profile Version This defines the current version of the profile. Each profile is versioned independently and versions numbers also are not related to values in the IANA JSContact Versions registry. The version identifier MUST be a valid "jsversion" value as defined in . Any addition to the list of JSContact properties supported by that profile MUST update the current version. As a note, if a semantic versioning scheme is not adequate for protocol designers making use of JSContact profiles, then an alternative approach is to register a new JSContact profile for each new version.
Supported Properties A profile defines a list of property entries to define the set of properties supported by that profile. Each entry consists of the following elements:
Property Name:
This is the name of the JSContact property that this entry refers to. This MUST be the name of a property registered in the "JSContact Properties" registry.
Property Context:
This is a comma-separated list of JSContact object types that support this property in this profile. Each of these types MUST also be listed in the property contexts for this property in the "JSContact Properties" registry, but a profile MAY only support the property in a subset of these contexts.
Restricted to be Mandatory:
This restricts the property to be mandatory in the listed property contexts, despite the property originally being defined to be optional in the same contexts. The verbatim value "mandatory" indicates that it is mandatory in this profile, the absence of any value indicates that the property is mandatory or optional according to its original definition. This means, a profile can make an optional property become mandatory, but it can not make a mandatory property become optional.
Restricted Property Type:
This restricts the property value type in the listed property contexts, despite the property originally being defined to have a less restrictive type definition. If set, the value MUST be a type signature as defined in and it MUST be a subtype of the original type signature for these property contexts. The absence of any value indicates that the original type signature applies. This means a profile can restrict the value types of a property, but it can not add value types for that property.
Restricted Enum Values:
This restricts the enumerated values of this property to a subset of those values. The values MUST be listed in the "JSContact Enum Values" registry for this property and context. The allowed values are separated by comma, the absence of any value indicates that all enumerated values are allowed.
Restricted PatchObject Keys:
This restricts the PatchObject value of this property such that each JSON Pointer key in the PatchObject MUST consist of exactly one JSON Pointer reference token. Doing so restricts a PatchObject to only patch properties that are set in the same object and only replace their values entirely. The verbatim value "Yes" indicates that this profile does restrict PatchObject keys, the absence of any value indicates that it does not restrict them. This MUST NOT be set to "Yes", if the property value type is not a PatchObject.
Since Profile Version:
This indicates the highest profile version in which this property definition was added or updated.
There MUST NOT an entry for the "@type" property, it always is supported for any JSContact object in any profile. Similarly, there MUST NOT be an entry for the "version" property of the Card object, it also is supported by any profile. The set of supported JSContact properties is then determined by the property entries as follows:
  1. Initialize the set with all properties of the Card object for which a property entry names this property and contains "Card" in the Property Context. If no property entry contains "Card" in the Property Context, initialize the set with all IANA-registered Card object properties.
  2. For every property in the set having an object type as value type, add all properties for which a property entry names that property and contains the object type in the Property Context. If no property entry contains the object type in the Property Context, add all IANA-registered properties for that object type to the set.
  3. Repeat the previous step until no further additions are possible.
A Card object is supported by the profile, if all its properties are part of the set of supported properties and all property values are valid according to the restrictions defined in the applicable property entries.
Example Profile This section provides an example for a JSContact profile, as it would be registered in the IANA JSContact Profiles registry. See and for the exact meaning of each registry item. This profile is just for illustration, it is not registered at IANA.
Name:
jscontact-simple
Profile Version:
1.0
Properties:
Properties of the "jscontact-simple" profile
Property Name Property Context Restricted to be Mandatory Restricted Property Type Restricted Enum Values Restricted PatchObject Keys Since Profile Version
addresses Card 1.0
emails Card 1.0
kind Card individual,org 1.0
localizations Card Yes 1.0
name Card 1.0
full Address mandatory 1.0
components Name 1.0
full Name 1.0
kind NameComponent 1.0
value NameComponent 1.0
This profile describes contact cards that can only contain:
  • Contact cards for individuals and organizations, but no other kinds such as groups or devices.
  • Full postal address lines, but no address components or any other property of the Address object type.
  • Full names and name components, but no other properties of the Name object type.
  • Email addresses, where all properties of the EmailAddress object are supported.
  • Localizations, with the restriction that the PatchObject must only patch properties of the Card object.
The following Card object conforms to that profile:
IANA Considerations
Creation of the JSContact Profile Registry IANA will add the "JSContact Profile" registry to the "JSContact" registry group originally created in . The purpose of this new registry is to describe protocol-specific profiles for JSContact data. The registry policy and change procedure of the "JSContact" registry group apply.
JSContact Profile Registry Template This template defines how to register a new JSContact profile. It consists of the following items:
  • Profile Name
  • Profile Version
  • Properties
and define the Profile Name and Profile Version item, respectively. For the Properties item, IANA will create a subregistry for each profile name (e.g. "Properties for xyz"), listing the properties supported by that profile. Each entry in that list is registered using the template defined in .
JSContact Profile Property Template This template consists of the following items:
  • Property Name
  • Property Context
  • Restricted to be Mandatory
  • Restricted Property Type
  • Restricted Enum Values
  • Restricted PatchObject Keys
  • Since Profile Version
See for the definitions of these items.
Initial Contents of the JSContact Profile Registry This document does define not any initial contents for the newly created registries.
Security Considerations This document does not provide new security considerations. The security considerations of apply.
References Normative References
ABNF definition for JSContact Profile Name
ABNF Rule for JSContact Profile Name