]> Ori Industries

rick.taylor@ori.co

JHU/APL

Edward.Birrane@jhuapl.edu

Transport Delay/Disruption Tolerant Networking DTN ipn BPv7 CBHE Bundle Protocol This document updates both the specification of the ipn URI scheme previously defined in and the rules for encoding of these URIs when used as an Endpoint Identifier (EID) in Bundle Protocol Version 7 (BPv7) as defined in . These updates update and clarify the structure and behavior of the ipn URI scheme, define encodings of ipn scheme URIs, and establish the registries necessary to manage this scheme. About This Document The latest revision of this draft can be found at . Status information for this document may be found at . Discussion of this document takes place on the Delay/Disruption Tolerant Networking Working Group mailing list (), which is archived at . Subscribe at . Source for this draft and an issue tracker can be found at .

Introduction The ipn URI scheme was originally defined in as a way to identify network nodes and node services using concisely-encoded integers that can be processed faster and with fewer resources than other verbose identifier schemes. The scheme was designed for use with the experimental Bundle Protocol version 6 (BPv6, ) and IPN was defined as an acronym for the term "InterPlanetary Network" in reference to its intended use for deep-space networking. Since then, the efficiency benefit of integer identifiers makes ipn scheme URIs useful for any networks operating with limited power, bandwidth, and/or compute budget. Therefore the term IPN is now used as a non-acronymous name. Similar to the experimental BPv6, the standardized Bundle Protocol version 7 (BPv7, ) codifies support for the use of the ipn URI scheme for the specification of bundle Endpoint Identifiers (EIDs). The publication of BPv7 has resulted in operational deployments of BPv7 nodes for both terrestrial and non-terrestrial use cases. This includes BPv7 networks operating over the terrestrial Internet and BPv7 networks operating in self-contained environments behind a shared administrative domain. The growth in the number and scale of deployments of BPv7 DTNs has been accompanied by a growth in the usage of the ipn URI scheme which has highlighted areas to improve the structure, moderation, and management of this scheme. This document updates the specification of the ipn URI scheme, in a backwards-compatible way, to provide needed improvements both in the scheme itself and its usage to specify EIDs with BPv7. Specifically, this document introduces a hierarchical structure for the assignment of ipn scheme URIs, clarifies the behavior and interpretation of ipn scheme URIs, defines efficient encodings of ipn scheme URIs, and updates/defines the registries associated for this scheme. Although originally developed by the deep space community for use with Bundle Protocol, the ipn URI scheme is sufficiently generic to be used in other environments where a concise unique representation of a resource on a particular node is required. It is important to remember that like most other URI schemes, the ipn URI scheme defines a unique identifier of a resource, and does not include any topological information describing how to route messages to that resource.

Conventions and Definitions The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 when, and only when, they appear in all capitals, as shown here. For the remainder of this document the term "ipn URI" is used to refer to a URI that uses the ipn scheme.

Core Concepts All ipn URIs, no matter the textual representation or binary encoding, MUST be considered as a tuple of the following three components:

• The Allocator Identifier
• The Node Number
• The Service Number

The Allocator Identifier indicates the entity responsible for assigning Node Numbers to individual resource nodes, maintaining uniqueness whilst avoiding the need for a single registry for all assigned Node Numbers. See Allocator Identifiers. The Node Number is a shared identifier assigned to all ipn URIs for resources co-located on a single node. See Node Numbers. The Service Number identifies the particular type of service of a resource. See Service Numbers. The combination of these three components guarantees that every correctly constructed ipn URI uniquely identifies a single resource. Additionally, the combination of the Allocator identifier and the Node Number provides a mechanism to uniquely identify the node on which a particular resource is expected to exist. See Fully-qualified Node Number. When considered from the perspective of BPv7, a Node Number is shared by all endpoints co-located on a single bundle processing node, and a Service Number identifies a certain type of bundle processing service.

The Null ipn URI It has been found that there is value in defining a unique 'null' ipn URI to indicate "nowhere". This ipn URI is termed the "Null ipn URI", and has all three components: Allocator Identifier, Node Number, and Service Number, set to the value zero (0). No resource identified by Null ipn URI exists, and is therefore by definition unreachable.

Allocator Identifiers An Allocator is any organization that wishes to assign Node Numbers for use with the ipn URI scheme, and has the facilities and governance to manage a public registry of assigned Node Numbers. The authorization to assign these numbers is provided through the assignment of an Allocator Identifier by IANA. Regardless of other attributes of an Allocator, such as a name, point of contact, or other identifying information, Allocators are identified by Allocator Identifiers: a unique, unsigned integer. The Allocator Identifier MUST be the sole mechanism used to identify the Allocator that has assigned the Node Number in an ipn URI. An Allocator may have multiple assigned Allocator Identifiers, but a given Allocator Identifier MUST only be associated with a single Allocator. A new IANA "'ipn' Scheme URI Allocator Identifiers" registry is defined for the registration of Allocator Identifiers, see 'ipn' Scheme URI Allocator Identifiers registry. Although the uniqueness of Allocator identifiers is required to enforce uniqueness of ipn URIs, some identifiers are explicitly reserved for experimentation or future use. Each Allocator assigns Node Numbers according to its own policies, without risk of creating an identical ipn URI, as permitted by the rules in the Node Numbers section of this document. Other than ensuring that any Node Numbers it allocates are unique amongst all Node Numbers it assigns, an Allocator does not need to coordinate its allocations with other Allocators. If a system does not require interoperable deployment of ipn scheme URIs, then the Private Use Node Number range, reserved by the Default Allocator for this purpose SHOULD be used.

Allocator Identifier Ranges Some organizations with internal hierarchies may wish to delegate the allocation of Node Numbers to one or more of their sub-organizations. Rather than assigning unique Allocator Identifiers to each sub-organization on a first-come first-served basis, there are operational benefits in assigning Allocator Identifiers to such an organization in a structured way so that an external observer can detect that a group of Allocator Identifiers are organizationally associated. An Allocator Identifier range is a set of consecutive Allocator Identifiers associated with the same Allocator. Each individual Allocator Identifier in a given range SHOULD be assigned to a distinct sub-organization of the Allocator. Assigning identifiers in this way allows external observers to both associate individual Allocator Identifiers with a single organization and to usefully differentiate amongst sub-organizations. The practice of associating a consecutive range of numbers with a single organization is inspired by the Classless Inter-domain Routing assignment of Internet Addresses described in . In that assignment scheme, an organization (such as an Internet Service Provider) is assigned a network prefix such that all addresses sharing that same prefix are considered to be associated with that organization. Each Allocator Identifier range is identified by the first Allocator Identifier in the range and the number of consecutive identifiers in the range. Allocator Identifier ranges differ from CIDR addresses in two important ways.

1. Allocator Identifiers are used to identify organizations and are not, themselves, addresses.
2. Allocator Identifiers may be less than 32 bits in length.

In order to differentiate between Allocator Identifier ranges using efficient bitwise operations, all ranges MUST be of a length that is a power of 2, and for given range of length N bits, the least-significant N bits of the first Allocator Identifier MUST be all 0. An example of the use of Allocator Identifier ranges for four organizations (A, B, C, and D) is as follows: Allocator Identifier Range Assignment Example

Organization	Range (dec)	Range (hex)	Range Length (Bits)
Org A	974848 .. 974975	0xEE000 .. 0xEE07F	7 bits
Org B	974976 .. 974991	0xEE080 .. 0xEE08F	4 bits
Org C	974992 .. 974993	0xEE090 .. 0xEE091	1 bit
Org D	974994	0xEE092	0 bits

With these assignments, any Allocator Identifier whose most-significant 25 bits match 0xEE000 belong to organization A. Similarly, any Allocator Identifier whose most-significant 28 bits match 0xEE080 belong to organization B and any Allocator Identifier whose most-significant 31 bits are 0xEE090 belong to organization C. Organisation D has a single Allocator Identifier, and hence a range of bit-length 0.

The Default Allocator As of the publication of , the only organization permitted to assign Node Numbers was the Internet Assigned Numbers Authority (IANA) which assigned Node Numbers via the IANA "CBHE Node Numbers" registry. This means that all ipn URIs created prior to the addition of Allocator Identifiers are assumed to have Node Number allocations that comply with the IANA "CBHE Node Numbers" registry. The presumption that, unless otherwise specified, Node Numbers are allocated by IANA from a specific registry is formalized in this update to the ipn URI scheme by designating IANA as the "Default Allocator", and assigned the Allocator identifier zero (0) in the 'ipn' Scheme URI Allocator Identifiers registry. In any case where an encoded ipn URI does not explicitly include an Allocator Identifier, an implementation MUST assume that the Node Number has been allocated by the Default Allocator. A new IANA "'ipn' Scheme URI Default Allocator Node Numbers" registry is defined to control the allocation of Node Numbers values by the Default Allocator. This new registry inherits behaviours and existing assignments from the IANA "CBHE Node Numbers" registry, and reserves some other values as defined in the Special Node Numbers section below.

Node Numbers A Node Number identifies a node that hosts a resource in the context of an Allocator. A Node Number is an unsigned integer. A single Node Number assigned by a single Allocator MUST refer to a single node. All Node Number assignments, by all Allocators, MUST be in the range 0 to 2^32-1. It is RECOMMENDED that Node Number zero (0) not be assigned by an Allocator to avoid confusion with the Null ipn URI.

Fully-qualified Node Numbers One of the advantages of ipn URis is the ability to easily split the identity of a particular service from the node upon which the service exists. For example a message received from one particular ipn URI may require a response to be sent to a different service on the same node that sent the original message. Historically the identifier of the sending node has been colloquially referred to as the "node number" or "node identifier". To avoid future confusion, when referring to the identifier of a particular node the term "Fully-qualified Node Number" (FQNN) MUST be used to refer to the combination of the Node Number component and Allocator Identifier component of an ipn URI that uniquely identifies a particular node. In other words, an FQNN is the unique identifier of a particular node that supports services identified by ipn URIs. In examples in this document, FQNNs are written as (Allocator Identifier, Node Number), e.g. (977000,100) is the FQNN for a node assigned Node Number 100 by an Allocator with Allocator Identifier 977000.

Special Node Numbers Some special-case Node Numbers are defined by the Default Allocator, see 'ipn' Scheme URI Default Allocator Node Numbers registry.

The Zero Node Number The Default Allocator assigns the use of Node Number zero (0) solely for identifying the Null ipn URI. This means that any ipn URI with a zero (0) Allocator Identifier and a zero (0) Node Number, but a non-zero Service Number component is invalid. Such ipn URIs MUST NOT be composed, and processors of such ipn URIs MUST consider them as the Null ipn URI.

LocalNode ipn URIs The Default Allocator reserves Node Number 2^32-1 (0xFFFFFFFFF) to specify resources on the local node, rather than on any specific individual node. This means that any ipn URI with a zero (0) Allocator Identifier and a Node Number of 2^32-1 refers to a service on the local bundle node. ipn URIs of this form are termed "LocalNode ipn URIs".

Private Use Node Numbers The Default Allocator provides a range of Node Numbers that are reserved for "Private Use", as defined in . Any ipn URI with a zero (0) Allocator Identifier and a Node Number reserved for "Private Use" is not guaranteed to be unique beyond a single administrative domain. An administrative domain, as used here, is defined as the set of nodes that share a unique allocation of FQNNs from the "Private Use" range. They can be considered to be equivalent to "Private Address Space" IPv4 addresses, as defined in .

Service Numbers A Service Number identifies a particular service operating on a node. The purpose of the Service Number is to provide well-known numeric identifiers for types of service in a network. A Service Number is an unsigned integer. A new IANA "'ipn' Scheme URI Service Numbers" registry is defined for the registration of Service Numbers, see 'ipn' Scheme URI Service Numbers registry. This registry defines standardized Service Numbers for services such as an administrative or well-known protocol service endpoints. This registry also defines ranges explicitly reserved for both experimentation and ad-hoc service identification.

Textual Encoding of ipn URIs All ipn scheme URIs comply with , and are therefore represented by scheme identifier, and a scheme-specific part. The scheme identifier is: ipn, and the scheme-specific parts are represented as a sequence of numeric components separated with the . character. It is formally defined in Appendix A, and can be informally considered as: .]. ]]> To keep the text representation concise, the follow rules apply:

1. All leading 0 characters MUST be omitted. A single 0 is valid.
2. If the Allocator Identifier is zero (0), then the <allocator-identifier> and . MUST be omitted.
3. If the Allocator Identifier is zero (0), and the Node Number is 2^32-1, i.e. the URI is an ipn LocalNode URI, then the character ! MAY be used instead of the digits 4294967295, although both forms are valid encodings.

Examples of the textual representation of ipn URIs can be found in Appendix B.

Usage of ipn URIs with BPv7 From the earliest days of experimentation with the Bundle Protocol there has been a need to identify the source and destination of a bundle. The IRTF standardisation of the experimental BPv6 termed the logical source or destination of a bundle as an "Endpoint" identified by an "Endpoint Identifier" (EID). BPv6 EIDs are formatted as URIs. This definition and representation of EIDs was carried from the IRTF BPv6 specification to the IETF BPv7 specification. BPv7 additionally defined an IANA registry called the "Bundle Protocol URI Scheme Types" registry which identifies those URI schemes than might be used to represent EIDs. The ipn URI scheme is one such URI scheme. This section identifies the behavior and interpretation of ipn URI schemes that MUST be followed when using this URI scheme to represent EIDs in BPv7. An ipn URI used as a BPv7 or BPv6 EID is termed an "ipn EID".

Uniqueness Constraints An ipn EID MUST identify a singleton endpoint. The bundle processing node that is the sole member of that endpoint MUST be the node identified by the Fully-qualified Node Number of the node. A single bundle processing node MAY have multiple ipn EIDs associated with it. However, every ipn EID that shares a FQNN MUST refer to the same bundle processing node. For example, ipn:977000.100.1, ipn:977000.100.2, and ipn:977000.100.3 MUST all refer to services registered on the bundle processing node identified with FQNN (977000,100). None of these EIDs could be registered on any other bundle processing node.

The Null Endpoint defines the concept of the 'null' endpoint, which is an endpoint that has no members and which is identified by a special 'null' EID. Within the ipn URI scheme, the 'null' EID is represented by the Null ipn URI. This means that the URIs dtn:none () and ipn:0.0 both refer to the BPv7 'null' endpoint.

BPv7 Node ID introduces the concept of a "Node ID" that has the same format as an EID and that uniquely identifies a bundle processing node. Any ipn EID can serve as a "Node ID" for the bundle processing node identified by its Fully-qualified Node Number. For example, any ipn EID of the form ipn:A.B.C may be used as the Source Node ID of any bundle created by the bundle processing node identified by the FQNN (A,B).

LocalNode ipn EIDs When a LocalNode ipn URI is used as a BPv7 or BPv6 EID it is termed a "LocalNode ipn EID". Because a LocalNode ipn EID only has meaning on the local bundle node, any such EID MUST be considered 'non-routeable'. This means that any bundle using a LocalNode ipn EID as a bundle source or bundle destination MUST NOT be allowed to leave the local node. Similarly, LocalNode ipn EIDs SHOULD NOT be present in any other part of a bundle that is transmitted off of the local node. For example, a LocalNode ipn EID SHOULD NOT be used as a Bundle Protocol Security security source EID for a bundle transmitted from the local bundle node, because such a source EID would have no meaning at a downstream bundle node.

Private Use Endpoints Bundles destined for EIDs that use an ipn URI with an Fully-qualified Node Number that is within the "Private Use" range of the Default Allocator MUST be considered 'non-routeable'. This means that they MUST NOT be permitted to exit a single administrative domain, see Private Use.

Administrative Endpoints The service type identified by a Service Number of zero (0) MUST be interpreted as the administrative endpoint of the node, as defined in . Non-zero Service Numbers MUST NOT be used to identify the administrative endpoint of a bundle node in an ipn EID.

Encoding ipn URIs with BPv7 requires that any URI scheme used to represent BPv7 EIDs MUST define how the scheme-specific part of the URI scheme is CBOR encoded. To meet this requirement, this section describes the CBOR encoding and decoding approach for ipn EIDs. The formal definition of these encodings is presented in Appendix C. While there is a single, canonical, textual representation of an ipn URI, there may exist multiple encodings for that URI. For example, defines a percent-encoding mechanism for a URI text string. Alternatively, allows for the encoding of URIs as CBOR text strings identified with a CBOR tag value of 32.

ipn EID CBOR Encoding Generic URI approaches to encoding ipn EIDs are unlikely to be efficient because they do not consider the underlying structure of the ipn URI scheme. Since the creation of the ipn URI scheme was motivated by the need for concise identification and rapid processing, the encoding of ipn EIDs maintains these properties. Fundamentally, ipn EIDs are represented as a sequence of identifiers. In the text syntax, the numbers are separated with the . delimiter; in CBOR, this ordered series of numbers can be represented by an array. Therefore, when encoding ipn EIDs for use with BPv7, the scheme-specific part of an ipn URI MUST be represented as a CBOR array of either two (2) or three (3) elements. Each element of the array MUST be encoded as a single CBOR unsigned integer. The structure and mechanisms of the two-element and three-element encodings are described below, and examples of the different encodings are provided in Appendix D.

Two-Element Scheme-Specific Encoding In the two-element scheme-specific encoding of an ipn EID, the first element of the array is an encoding of the Fully-qualified Node Number and the second element of the array is the ipn EID Service Number. The FQNN encoding MUST be a 64 bit unsigned integer constructed in the following way:

1. The least significant 32 bits MUST represent the Node Number associated with the ipn EID.
2. The most significant 32 bits MUST represent the Allocator Identifier associated with the ipn EID.

For example the ipn EID of ipn:977000.100.1 has an FQNN of (977000,100) which would be encoded as 0xEE86800000064. The resulting two-element array [0xEE86800000064, 0x01] would be encoded in CBOR as the 11 octet value 0x821B000EE8680000006401. The two-element scheme-specific encoding provides for backwards compatibility with the encoding provided in . When used in this way, the encoding of the FQNN replaces the use of the "Node Number" that was specified in RFC9171. When the Node Number is allocated by the Default Allocator, then the encoding of the FQNN and the RFC9171 encoding of the "Node Number" are identical. This encoding scheme MUST be implemented by any BPv7 bundle processing node that supports ipn URIs for the specification of BPv7 EIDs.

Three-Element Scheme-Specific Encoding In the three-element scheme-specific encoding of an ipn EID, the first element of the array is the Allocator Identifier, the second element of the array is Node Number, and the third element of the array is the Service Number. For example, the ipn EID of ipn:977000.100.1 would result in the three-element array of [977000,100,1] which would be encoded in CBOR as the 9 octet value 0x831A000EE868186401. The three-element scheme-specific encoding allows for a more efficient representation of ipn EIDs using smaller Allocator Identifiers. When encoding an ipn EID using the Default Allocator with this encoding scheme, the first element of the array MUST be the value zero (0). In this case using the two-element encoding will result in a more concise CBOR representation, and it is RECOMMENDED that implementations do so.

ipn EID CBOR Decoding The presence of different scheme-specific encodings does not introduce any decoding ambiguity. An ipn EID CBOR decoder can reconstruct an ipn EID using the following logic. In this description, the term enc_eid refers to the CBOR encoded ipn EID, and the term ipn_eid refers to the decoded ipn EID. = 2^32 { ipn_eid.allocator_identifier := N >> 32; ipn_eid.node_number := N & (2^32-1); } else { ipn_eid.allocator_identifier := 0; ipn_eid.node_number := N; } } ]]>

ipn EID Matching Regardless of whether the two-element or three-element scheme-specific encoding is used, ipn EID matching MUST be performed on the decoded EID information itself. Different encodings of the same ipn EID MUST be treated as equivalent when performing EID-specific functions. For example, the ipn EID of ipn:977000.100.1 can be represented as either the two-element encoding of 0x821B000EE8680000006401 or the three-element encoding of 0x831A000EE868186401. While message integrity and other syntax-based checks may treat these values differently, any EID-based comparisons MUST treat these values the same - as representing the ipn EID ipn:977000.100.1.

Special Considerations The ipn URI scheme provides a compact and hierarchical mechanism for identifying services on network nodes. There is a significant amount of utility in the ipn URI scheme approach to identification. However, implementers should take into consideration the following observations on the use of the ipn URI scheme.

Scheme Compatibility The ipn scheme update that has been presented in this document preserves backwards compatibility with any ipn URI scheme going back to the provisional definition of the ipn scheme in the experimental Compressed Bundle Header Encoding in 2011. This means that any ipn URI that was valid prior to the publication of this update remains a valid ipn URI. Similarly, the two-element scheme-specific encoding is also backwards compatible with the encoding of ipn URIs provided in . Any existing BPv7-compliant implementation will produce an ipn URI encoding in compliance with this specification. The introduction of optional non-default Allocator Identifiers and a three-element scheme-specific encoding make this ipn URI scheme update not forwards compatible. Existing software MUST be updated to be able to process non-default Allocator Identifiers and three-element scheme-specific encodings. It is RECOMMENDED that BP implementations upgrade to process these new features to benefit from the scalability provided by Allocator Identifiers and the encoding efficiencies provided by the three-element encoding.

Late Binding mandates the concept of "late binding" of an EID, where-by the address of the destination of a bundle is resolved from its identifier hop by hop as it transits a DTN. This per-hop binding of identifiers to addresses underlines the fact that EIDs are purely names, and should not carry any implicit or explicit information concerning the current location or reachability of an identified node and service. This removes the need to rename a node as its location changes. The concept of "late binding" is preserved in this ipn URI scheme. Elements of an ipn URI SHOULD NOT be regarded as carrying information relating to location, reachability, or other addressing/routing concern. An example of incorrect behaviour would be to assume that a given Allocator assigns Node Numbers derived from link-layer addresses and to interpret the Node Number component of an ipn URI directly as a link-layer address. No matter the mechanism an Allocator uses for the assignment of Node Numbers, they remain just numbers, without additional meaning.

Security Considerations This section updates the security considerations from to account for the inclusion of Allocator Identifiers in the ipn URI scheme.

Reliability and consistency None of the BP endpoints identified by ipn EIDs are guaranteed to be reachable at any time, and the identity of the processing entities operating on those endpoints is never guaranteed by the Bundle Protocol itself. Verification of the signature provided by the Block Integrity Block targeting the bundle's primary block, as defined by Bundle Protocol Security , is required for this purpose.

Malicious construction Malicious construction of a conformant ipn URI is limited to the malicious selection of Allocator Identifiers, Node Numbers, and Service Numbers. That is, a maliciously constructed ipn EID could be used to direct a bundle to an endpoint that might be damaged by the arrival of that bundle or, alternatively, to declare a false source for a bundle and thereby cause incorrect processing at a node that receives the bundle. In both cases (and indeed in all bundle processing), the node that receives a bundle should verify its authenticity and validity before operating on it in any way.

Back-end transcoding The limited expressiveness of URIs of the ipn scheme effectively eliminates the possibility of threat due to errors in back-end transcoding.

Rare IP address formats Not relevant, as IP addresses do not appear anywhere in conformant ipn URIs.

Sensitive information Because ipn URIs are used only to represent the numeric identities of resources, the risk of disclosure of sensitive information due to interception of these URIs is minimal. Examination of ipn EIDs could be used to support traffic analysis; where traffic analysis is a plausible danger, bundles should be conveyed by secure convergence-layer protocols that do not expose endpoint IDs.

Semantic attacks The simplicity of ipn URI scheme syntax minimizes the possibility of misinterpretation of a URI by a human user.

IANA Considerations The following sections detail requests to IANA for the creation of a new registry, and the renaming of two existing registries.

'ipn' Scheme URI Allocator Identifiers registry IANA is requested to create a new registry entitled "'ipn' Scheme URI Allocator Identifiers". The registration policy for this registry is: 'ipn' Scheme URI Numbering Allocator Identifiers registration policies

Range	Registration Policy
0 .. 2^16-1	Expert Review, Single Allocator Identifiers only
2^16 .. 2^30-1	Expert Review
2^30 .. 2^31-1	Experimentation
2^31 .. 2^32-1	Reserved, Future Expansion
>= 2^32	Reserved

Each entry in this registry associates one or more Allocator Identifiers with a single organization. Within the registry, the organization is identified using the "Name" and "Point of Contact" fields. It is expected that each identified organization publishes some listing of allocated node numbers - the pointer to which is listed in the "Reference" field of the registry. The initial values for the registry are: 'ipn' Scheme URI Allocator Identifiers initial values

Organization	Range (dec)	Range (hex)	Range Length (Bits)	Reference	Point of Contact
Default Allocator	0	0x0	0	This document	IANA
CCSDS	1	0x1	0	TBD	www.sana.org
Example Range	974848 .. 978943	0xEE000 .. 0xEEFFF	12 bits	This document	IANA

The "Example Range" is assigned for use in examples in documentation.

Guidance for Designated Experts TDB The working group is satisfied with the technical specification in this document, but there are reservations amongst the WG around the governance of the assignment of Allocator Identifiers, and is engaging with the IESG/IANA to ensure best practice is followed. The intent is to use mechanism similar to those in place for IP addresses (RFC1881, RFC3513, RFC1466,...), AS numbers and domains (RFC1591).

'ipn' Scheme URI Default Allocator Node Numbers registry IANA is requested to rename the "CBHE Node Numbers" registry defined in to the "'ipn' Scheme URI Default Allocator Node Numbers" registry. The registration policy for this registry is updated to be: 'ipn' Scheme URI Default Allocator Node Numbers registration policies

Range	Registration Policy
0	Reserved for the Null ipn URI
1 .. 2^14-1	Private Use
2^14 .. 2^32-2	Expert Review
2^32-1	Reserved for LocalNode ipn URIs
>= 2^32	Invalid

As IANA is requested to rename the registry, all existing registrations will remain.

'ipn' Scheme URI Service Numbers registry IANA is requested to rename the "CBHE Service Numbers" registry defined in to the "'ipn' Scheme URI Service Numbers" registry. The registration policy for this registry is updated to be: 'ipn' Scheme URI Service Numbers registration policies

Range	Registration Policy
0 .. 23	RFC Required
24 .. 2^15-1	Specification Required
2^15 .. 2^31-1	Private Use
>= 2^31	Reserved

The current values for the registry remain, and are rewritten as: 'ipn' Scheme URI Service Numbers initial values

Value	Version	Description	Reference
0	BPv6, BPv7	The Administrative Endpoint	, This document
1	BPv6	CCSDS File Delivery Service
1	BPv7	Unassigned
2	BPv6	Reserved
2	BPv7	Unassigned
3 .. 63	BPv6, BPv7	Unassigned
64 .. 1023	BPv6	Allocated to the Space Assigned Numbers Authority (SANA) for use by Consultative Committee for Space Data Systems (CCSDS) missions
64 .. 1023	BPv7	Unassigned

References Normative References The DTNRG Research Group has defined the experimental Licklider Transmission Protocol (LTP) and the Compressed Bundle Header Encoding (CBHE) mechanism for the InterPlanetary Network ('ipn' URI scheme). Moreover, RFC 5050 defines values for the Bundle Protocol administrative record type. All of these fields are subject to a registry. For the purpose of its research work, the group has created ad hoc registries. As the specifications are stable and have multiple interoperable implementations, the group would like to hand off the registries to IANA for official management. This document describes the necessary IANA actions. This document presents a specification for the Bundle Protocol, adapted from the experimental Bundle Protocol specification developed by the Delay-Tolerant Networking Research Group of the Internet Research Task Force and documented in RFC 5050. This document describes the end-to-end protocol, block formats, and abstract service description for the exchange of messages (bundles) in Delay Tolerant Networking (DTN). This document was produced within the IRTF's Delay Tolerant Networking Research Group (DTNRG) and represents the consensus of all of the active contributors to this group. See http://www.dtnrg.org for more information. This memo defines an Experimental Protocol for the Internet community. In many standards track documents several words are used to signify the requirements in the specification. These words are often capitalized. This document defines these words as they should be interpreted in IETF documents. This document specifies an Internet Best Current Practices for the Internet Community, and requests discussion and suggestions for improvements. RFC 2119 specifies common key words that may be used in protocol specifications. This document aims to reduce the ambiguity by clarifying that only UPPERCASE usage of the key words have the defined special meanings. Many protocols make use of points of extensibility that use constants to identify various protocol parameters. To ensure that the values in these fields do not have conflicting uses and to promote interoperability, their allocations are often coordinated by a central record keeper. For IETF protocols, that role is filled by the Internet Assigned Numbers Authority (IANA). To make assignments in a given registry prudently, guidance describing the conditions under which new values should be assigned, as well as when and how modifications to existing values can be made, is needed. This document defines a framework for the documentation of these guidelines by specification authors, in order to assure that the provided guidance for the IANA Considerations is clear and addresses the various issues that are likely in the operation of a registry. This is the third edition of this document; it obsoletes RFC 5226. Internet technical specifications often need to define a formal syntax. Over the years, a modified version of Backus-Naur Form (BNF), called Augmented BNF (ABNF), has been popular among many Internet specifications. The current specification documents ABNF. It balances compactness and simplicity with reasonable representational power. The differences between standard BNF and ABNF involve naming rules, repetition, alternatives, order-independence, and value ranges. This specification also supplies additional rule definitions and encoding for a core lexical analyzer of the type common to several Internet specifications. [STANDARDS-TRACK] The Concise Binary Object Representation (CBOR) is a data format whose design goals include the possibility of extremely small code size, fairly small message size, and extensibility without the need for version negotiation. These design goals make it different from earlier binary serializations such as ASN.1 and MessagePack. This document obsoletes RFC 7049, providing editorial improvements, new details, and errata fixes while keeping full compatibility with the interchange format of RFC 7049. It does not create a new version of the format. This document proposes a notational convention to express Concise Binary Object Representation (CBOR) data structures (RFC 7049). Its main goal is to provide an easy and unambiguous way to express structures for protocol messages and data formats that use CBOR or JSON. Informative References The Consultative Committee for Space Data Systems This memo discusses the strategy for address assignment of the existing 32-bit IPv4 address space with a view toward conserving the address space and limiting the growth rate of global routing state. This document obsoletes the original Classless Inter-domain Routing (CIDR) spec in RFC 1519, with changes made both to clarify the concepts it introduced and, after more than twelve years, to update the Internet community on the results of deploying the technology described. This document specifies an Internet Best Current Practices for the Internet Community, and requests discussion and suggestions for improvements. This document describes address allocation for private internets. This document specifies an Internet Best Current Practices for the Internet Community, and requests discussion and suggestions for improvements. A Uniform Resource Identifier (URI) is a compact sequence of characters that identifies an abstract or physical resource. This specification defines the generic URI syntax and a process for resolving URI references that might be in relative form, along with guidelines and security considerations for the use of URIs on the Internet. The URI syntax defines a grammar that is a superset of all valid URIs, allowing an implementation to parse the common components of a URI reference without knowing the scheme-specific requirements of every possible identifier. This specification does not define a generative grammar for URIs; that task is performed by the individual specifications of each URI scheme. [STANDARDS-TRACK] This document defines a security protocol providing data integrity and confidentiality services for the Bundle Protocol (BP). This document describes a convention by which Delay-Tolerant Networking (DTN) Bundle Protocol (BP) "convergence-layer" adapters may represent endpoint identifiers in a compressed form within the primary blocks of bundles, provided those endpoint identifiers conform to the structure prescribed by this convention. Compressed Bundle Header Encoding (CBHE) compression is a convergence-layer adaptation. It is opaque to bundle processing. Therefore, it has no impact on the interoperability of different Bundle Protocol implementations, but instead affects only the interoperability of different convergence-layer adaptation implementations. This document is a product of the Delay-Tolerant Networking Research Group and has been reviewed by that group. No objections to its publication as an RFC were raised. This document defines an Experimental Protocol for the Internet community.

ipn URI Scheme Text Syntax The text syntax of an ipn URI MUST comply with the following ABNF syntax, including the core ABNF syntax rule for DIGIT defined by that specification:

ipn URI Scheme Text Representation Examples This section provides some example ipn URIs in their textual representation.

Using the Default Allocator Consider the ipn URI identifying Service Number 2 on Node Number 1 allocated by the Default Allocator (0). The complete seven character representation of this URI would be as follows:

Using a non-default Allocator Consider the ipn URI identifying Service Number 1 on Node Number 1 allocated by Allocator 977000. The complete 14 character representation of this URI would be as follows:

The Null ipn URI The Null ipn URI is represented as:

A LocalNode ipn URI Consider the ipn URI identifying Service Number 7 on the local node. The complete seven character representation of this URI would be as follows:

ipn URI Scheme CBOR Encoding A BPv7 endpoint identified by an ipn URI, when encoded in Concise Binary Object Representation (CBOR) , MUST comply with the following Concise Data Definition Language (CDDL) specification: Note: The node-number component will be the numeric representation of the concatenation of the Allocator Identifier and Node Number when the 2-element encoding scheme has been used.

ipn URI Scheme CBOR Encoding Examples This section provides some example CBOR encodings of ipn EIDs.

Using the Default Allocator Consider the ipn EID ipn:1.1. This textual representation of an ipn EID identifies Service Number 1 on Node Number 1 allocated by the Default Allocator (0). The complete five octet encoding of this EID using the two-element scheme-specific encoding would be as follows: The complete six octet encoding of this EID using the three-element scheme-specific encoding would be as follows:

Using a non-default Allocator Consider the ipn EID ipn:977000.1.1. This textual representation of an ipn EID identifies Service Number 1 on Node Number 1 allocated by Allocator 977000. The complete thirteen octet encoding of this EID using the two-element scheme-specific encoding would be as follows: The complete ten octet encoding of this EID using the three-element scheme-specific encoding would be as follows:

The 'null' Endpoint The 'null' EID of ipn:0.0 can be encoded in the following ways: The complete five octet encoding of the 'null' ipn EID using the two-element scheme-specific encoding would be as follows: The complete six octet encoding of the 'null'' ipn EID using the three-element scheme-specific encoding would be as follows:

Acknowledgments The following DTNWG participants contributed technical material, use cases, and critical technical review for this URI scheme update: Scott Burleigh of the IPNGROUP, Keith Scott, Brian Sipos of the Johns Hopkins University Applied Physics Laboratory, and Jorge Amodio of LJCV Electronics. Additionally, the authors wish to thank members of the CCSDS SIS-DTN working group at large who provided useful review and commentary on this document and its implications for the future of networked space exploration.