A Taxonomy of operational security considerations for manufacturer installed keys and Trust Anchors

Introduction An increasing number of protocols derive a significant part of their security by using trust anchors that are installed by manufacturers. Disclosure of the list of trust anchors does not usually cause a problem, but changing them in any way does. This includes adding, replacing or deleting anchors. The document deals with how trust anchor stores are managed in the device which uses them. This document deals with how the PKI associated with such a trust anchor is managed. Many protocols also leverage manufacturer installed identities. These identities are usually in the form of Initial Device Identity certificates (IDevID). The identity has two components: a private key that must remain under the strict control of a trusted part of the device, and a public part (the certificate), which (ignoring, for the moment, personal privacy concerns) may be freely disclosed. There also situations where identities are tied up in the provision of symmetric shared secrets. A common example is the SIM card (): it now comes as a virtual SIM, which could in theory be factory provisioned. The provision of an initial, per-device default password also falls into the category of symmetric shared secret. It is further not unusual for many devices (particularly smartphones) to also have one or more group identity keys. This is used, for instance, in to make claims about being a particular model of phone (see ). The key pair that does this is loaded into large batches of phones for privacy reasons. The trust anchors are used for a variety of purposes. Trust anchors are used to verify:

the signature on a software update (as per ),
a TLS Server Certificate, such as when setting up an HTTPS connection,
the format voucher that provides proof of an ownership change.

Device identity keys are used when performing enrollment requests (in , and in some uses of . The device identity certificate is also used to sign Evidence by an Attesting Environment (see ). These security artifacts are used to anchor other chains of information: an EAT Claim as to the version of software/firmware running on a device (), an EAT claim about legitimate network activity (via , or embedded in the IDevID in ). Known software versions lead directly to vendor/distributor signed Software Bill of Materials (SBOM), such as those described by and the NTIA/SBOM work and CISQ/OMG SBOM work underway . In order to manage risks and assess vulnerabilities in a Supply Chain, it is necessary to determine a degree of trustworthiness in each device. A device may mislead audit systems as to its provenance, about its software load or even about what kind of device it is (see for a humorous example). In order to properly assess the security of a Supply Chain it is necessary to understand the kinds and severity of the threats which a device has been designed to resist. To do this, it is necessary to understand the ways in which the different trust anchors and identities are initially provisioned, are protected, and are updated. To do this, this document details the different trust anchors (TrAnc) and identities (IDs) found in typical devices. The privacy and integrity of the TrAncs and IDs is often provided by a different, superior artifact. This relationship is examined. While many might desire to assign numerical values to different mitigation techniques in order to be able to rank them, this document does not attempt to do that, as there are too many other (mostly human) factors that would come into play. Such an effort is more properly in the purview of a formal ISO9001 process such as ISO14001.

Terminology This document is not a standards track document, and it does not make use of formal requirements language. This section will be expanded to include needed terminology as required. The words Trust Anchor are contracted to TrAnc rather than TA, in order not to confuse with 's "Trusted Application". This document defines a number of hyphenated terms, and they are summarized here:

device-generated:: a private or symmetric key which is generated on the device
infrastructure-generated:: a private or symmetric key which is generated by some system, likely located at the factory that built the device
mechanically-installed:: when a key or certificate is programmed into non-volatile storage by an out-of-band mechanism such as JTAG
mechanically-transferred:: when a key or certificate is transferred into a system via private interface, such as serial console, JTAG managed mailbox, or other physically private interface
network-transferred:: when a key or certificate is transferred into a system using a network interface which would be available after the device has shipped. This applies even if the network is physically attached using a bed-of-nails .
device/infrastructure-co-generated:: when a private or symmetric key is derived from a secret previously synchronized between the silicon vendor and the factory using a common algorithm.

Applicability Model There is a wide variety of devices to which this analysis can apply. (See .) This document will use a J-group processor as a sample. This class is sufficiently large to experience complex issues among multiple CPUs, packages and operating systems, but at the same time, small enough that this class is often deployed in single-purpose IoT-like uses. Devices in this class often have Secure Enclaves (such as the "Grapeboard"), and can include silicon manufacturer controlled processors in the boot process (the Raspberry PI boots under control of the GPU). Almost all larger systems (servers, laptops, desktops) include a Baseboard Management Controller (BMC), which ranges from a M-Group Class 3 MCU, to a J-Group Class 10 CPU (see, for instance which uses a Linux kernel and system inside the BMC). As the BMC usually has complete access to the main CPU's memory, I/O hardware and disk, the boot path security of such a system needs to be understood first as being about the security of the BMC.

A reference manufacturing/boot process In order to provide for immutability and privacy of the critical TrAnc and IDs, many CPU manufacturers will provide for some kind of private memory area which is only accessible when the CPU is in certain privileged states. See the Terminology section of , notably TEE, REE, and TAM, and also section 4, Architecture. The private memory that is important is usually non-volatile and rather small. It may be located inside the CPU silicon die, or it may be located externally. If the memory is external, then it is usually encrypted by a hardware mechanism on the CPU, with only the key kept inside the CPU. The entire mechanism may be external to the CPU in the form of a hardware-TPM module, or it may be entirely internal to the CPU in the form of a firmware-TPM. It may use a custom interface to the rest of the system, or it may implement the TPM 1.2 or TPM 2.0 specifications. Those details are important to performing a full evaluation, but do not matter much to this model (see initial-enclave-location below). During the manufacturing process, once the components have been soldered to the board, the system is usually put through a system-level test. This is often done as a "bed-of-nails" test , where the board has key points attached mechanically to a test system. A process tests the System Under Test, and then initializes some firmware into the still empty flash storage. It is now common for a factory test image to be loaded first: this image will include code to initialize the private memory key described above, and will include a first-stage bootloader and some kind of (primitive) Trusted Application Manager (TAM). (The TAM is a piece of software that lives within the trusted execution environment.) Embedded in the stage one bootloader will be a Trust Anchor that is able to verify the second-stage bootloader image. After the system has undergone testing, the factory test image is erased, leaving the first-stage bootloader. One or more second-stage bootloader images are installed. The production image may be installed at that time, or if the second-stage bootloader is able to install it over the network, it may be done that way instead. There are many variations of the above process, and this section is not attempting to be prescriptive, but to be provide enough illustration to motivate subsequent terminology. The process may be entirely automated, or it may be entirely driven by humans working in the factory, or a combination of the above. These steps may all occur on an access-controlled assembly line, or the system boards may be shipped from one place to another (maybe another country) before undergoing testing. Some systems are intended to be shipped in a tamper-proof state, but it is usually not desirable that bed-of-nails testing be possible without tampering, so the initialization process is usually done prior to rendering the system tamper-proof. An example of a one-way tamper-proof, weather resistant treatment might to mount the system board in a case and fill the case with resin. Quality control testing may be done prior to as well as after the application of tamper-proofing, as systems which do not pass inspection may be reworked to fix flaws, and this should ideally be impossible once the system has been made tamper-proof.

Types of Trust Anchors Trust Anchors (TrAnc) are fundamentally public keys with authorizations implicitly attached through the code that references them. They are used to validate other digitally signed artifacts. Typically, these are chains of PKIX certificates leading to an End-Entity certificate (EE). The chains are usually presented as part of an externally provided object, with the term "externally" to be understood as being as close as untrusted flash, to as far as objects retrieved over a network. There is no requirement that there be any chain at all: the trust anchor can be used to validate a signature over a target object directly. The trust anchors are often stored in the form of self-signed certificates. The self-signature does not offer any cryptographic assurance, but it does provide a form of error detection, providing verification against non-malicious forms of data corruption. If storage is at a premium (such as inside-CPU non-volatile storage) then only the public key itself need to be stored. For a 256-bit ECDSA key, this is 32 bytes of space. When evaluating the degree of trust for each trust anchor there are four aspects that need to be determined:

can the trust anchor be replaced or modified?
can additional trust anchors be added?
can trust anchors be removed?
how is the private key associated with the trust anchor, maintained by the manufacturer, maintained?

The first three things are device specific properties of how the integrity of the trust anchor is maintained. The fourth property has nothing to do with the device, but has to do with the reputation and care of the entity that maintains the private key. Different anchors have different authorizations associated with them. These are:

Secured First Boot Trust Anchor This anchor is part of the first-stage boot loader, and it is used to validate a second-stage bootloader which may be stored in external flash. This is called the initial software trust anchor.

Software Update Trust Anchor This anchor is used to validate the main application (or operating system) load for the device. It can be stored in a number of places. First, it may be identical to the Secure Boot Trust Anchor. Second, it may be stored in the second-stage bootloader, and therefore its integrity is protected by the Secured First Boot Trust Anchor. Third, it may be stored in the application code itself, where the application validates updates to the application directly (update in place), or via a double-buffer arrangement. The initial (factory) load of the application code initializes the trust arrangement. In this situation the application code is not in a secured boot situation, as the second-stage bootloader does not validate the application/operating system before starting it, but it may still provide measured boot mechanism.

Trusted Application Manager anchor This anchor is the secure key for the Trusted Application Manager (TAM). Code which is signed by this anchor will be given execution privileges as described by the manifest which accompanies the code. This privilege may include updating anchors.

Public WebPKI anchors These anchors are used to verify HTTPS certificates from web sites. These anchors are typically distributed as part of desktop browsers, and via desktop operating systems. The exact set of these anchors is not precisely defined: it is usually determined by the browser vendor (e.g., Mozilla, Google, Apple, Safari, Microsoft), or the operating system vendor (e.g., Apple, Google, Microsoft, Ubuntu). In most cases these vendors look to the CA/Browser Forum for inclusion criteria.

DNSSEC root This anchor is part of the DNS Security extensions. It provides an anchor for securing DNS lookups. Secure DNS lookups may be important in order to get access to software updates. This anchor is now scheduled to change approximately every 3 years, with the new key announced several years before it is used, making it possible to embed keys that will be valid for up to five years. This trust anchor is typically part of the application/operating system code and is usually updated by the manufacturer when they do updates. However, a system that is connected to the Internet may update the DNSSEC anchor itself through the mechanism described in . There are concerns that there may be a chicken and egg situation for devices that have remained in a powered off state (or disconnected from the Internet) for some period of years. That upon being reconnected, that the device would be unable to do DNSSEC validation. This failure would result in them being unable to obtain operating system updates that would then include the updates to the DNSSEC key.

Private/Cloud PKI anchors It is common for many IoT and network appliances to have links to vendor provided services. For instance, the IoT device that calls home for control purposes, or the network appliance that needs to validate a license key before it can operate. (This may be identical to, or distinct from a Software Update anchor. In particular, the device might call home over HTTPS to learn if there is a software update that needs to be done, but the update is signed by another key) Such vendor services can be provided with public certificates, but often the update policies such public anchors precludes their use in many operational environments. Instead a private PKI anchor is included. This can be in the form a multi-level PKI (as described in ), or degenerate to a level-1 PKI: a self-signed certificate. A level-1 PKI is very simple to create and operate, and there are innumerable situations where there is just a call to "curl" with the "--pinnedpubkey" option has been used.

Onboarding and other Enrollment anchors , and specifies a mechanism for onboarding of new devices. The voucher archifact is transfered to the device by different means, and the device must verify the signature on it. This requires a trust anchor to be built-in to the device, and some kind of private PKI be maintained by the vendor (or it's authorized designate). provides some advice on choices in PKI design for a MASA. The taxomony presented in this document apply to describing how this PKI has been designed.

Onboarded network-local anchors , and provide mechanisms by which new trust anchors may be loaded by a device during an onboarding process. The trust anchors involved are typically local to an enterprise and are used to validate connections to other devices in the network. This typically includes connections to network management systems that may also load or modify other trust anchors in the system. provides some advice in the BRSKI () case for appropriate PKI complexity for such local PKIs

What else? what anchors are still missing?

Types of Identities Identities are installed during manufacturing time for a variety of purposes. Identities require some private component. Asymmetric identities (e.g., RSA, ECDSA, EdDSA systems) require a corresponding public component, usually in the form of a certificate signed by a trusted third party. This certificate associates the identity with attributes. The process of making this coordinated key pair and then installing it into the device is called identity provisioning.

Manufacturer installed IDevID certificates defines a category of certificates that are installed by the manufacturer which contain a device unique serial number. A number of protocols depend upon this certificate.

and introduce mechanisms for new devices (called pledges) to be onboarded into a network without intervention from an expert operator. A number of derived protocols such as , , , extend this in a number of ways.
depends upon a key provisioned into the Attesting Environment to sign Evidence.
may depend upon a key provisioned into the device in order to decrypt software updates. Both symmetric and asymmetric keys are possible. In both cases, the decrypt operation depends upon the device having access to a private key provisioned in advance. The IDevID can be used for this if algorithm choices permit. ECDSA keys do not directly support encryption in the same way that RSA does, for instance, but the addition of ECIES can solve this. There may be other legal considerations why the IDevID might not be used, and a second key provisioned.
TBD

Operational Considerations for Manufacturer IDevID Public Key Infrastructure The manufacturer has the responsibility to provision a key pair into each device as part of the manufacturing process. There are a variety of mechanisms to accomplish this, which this document will overview. There are three fundamental ways to generate IDevID certificates for devices:

generating a private key on the device, creating a Certificate Signing Request (or equivalent), and then returning a certificate to the device.
generating a private key outside the device, signing the certificate, and the installing both into the device.
deriving the private key from a previously installed secret seed, that is shared with only the manufacturer.

There is a fourth situation where the IDevID is provided as part of a Trusted Platform Module (TPM), in which case the TPM vendor may be making the same tradeoffs. The document provides some practical instructions on setting up a reference implementation for ECDSA keys using a three-tier mechanism.

Key Generation process

On-device private key generation Generating the key on-device has the advantage that the private key never leaves the device. The disadvantage is that the device may not have a verified random number generator. is an example of a successful attack on this scenario. There are a number of options of how to get the public key securely from the device to the certification authority. This transmission must be done in an integral manner, and must be securely associated with the assigned serial number. The serial number goes into the certificate, and the resulting certificate needs to be loaded into the manufacturer's asset database. One way to do the transmission is during a factory Bed of Nails test (see ) or Boundary Scan. When done via a physical connection like this, then this is referred to as a device-generated / mechanically-transferred method. There are other ways that could be used where a certificate signing request is sent over a special network channel when the device is powered up in the factory. This is referred to as the device-generated / network-transferred method. Regardless of how the certificate signing request is sent from the device to the factory, and how the certificate is returned to the device, a concern from production line managers is that the assembly line may have to wait for the certification authority to respond with the certificate. After the key generation, the device needs to set a flag such that it no longer will generate a new key / will accept a new IDevID via the factory connection. This may be a software setting, or could be as dramatic as blowing a fuse. The risk is that if an attacker with physical access is able to put the device back into an unconfigured mode, then the attacker may be able to substitute a new certificate into the device. It is difficult to construct a rationale for doing this, unless the network initialization also permits an attacker to load or replace trust anchors at the same time. Devices are typically constructed in a fashion such that the device is unable to ever disclose the private key via an external interface. This is usually done using a secure-enclave provided by the CPU architecture in combination with on-chip non-volatile memory.

Off-device private key generation Generating the key off-device has the advantage that the randomness of the private key can be better analyzed. As the private key is available to the manufacturing infrastructure, the authenticity of the public key is well known ahead of time. If the device does not come with a serial number in silicon, then one should be assigned and placed into a certificate. The private key and certificate could be programmed into the device along with the initial bootloader firmware in a single step. As the private key can be known to the factory in advance of the device being ready for it, the certificate can also be generated in advance. This hides the latency to talk to the CA, and allows for the connectivity to the CA to be less reliable without shutting down the assembly line. A single write to the flash of the device can contain the entire firmware of the device, including configuration of trust anchors and private keys. The major downside to generating the private key off-device is that it could be seen by the manufacturing infrastructure. It could be compromised by humans in the factory, or the equipment could be compromised. The use of this method increases the value of attacking the manufacturing infrastructure. If private keys are generated by the manufacturing plant, and are immediately installed, but never stored, then the window in which an attacker can gain access to the private key is immensely reduced. As in the previous case, the transfer may be done via physical interfaces such as bed-of-nails, giving the infrastructure-generated / mechanically-transferred method. There is also the possibility of having a infrastructure-generated / network-transferred key. There is a support for "server-generated" keys in , , and . All methods strongly recommend encrypting the private key for transfer. This is difficult to comply with here as there is not yet any private key material in the device, so in many cases it will not be possible to encrypt the private key.

Key setup based on 256 bit secret seed A hybrid of the previous two methods leverages a symmetric key that is often provided by a silicon vendor to OEM manufacturers. In this section there are two Original Equipment Manufacturer: the first is the familiar one that is responsible for the entire device, and the second one is the silicon vendor in which this symmetric seed key has been provisioned. This section calls the silicon vendor the Silicon-OEM. In this process, the Silicom-OEM provisions a unique 256-bit secret into each device shipped. This can be via fuses blown in a CPU's Trusted Execution Environment , a TPM, or a Secure Element is provisioned at fabrication time with a unique, secret seed, usually at least 256 bits in size. In some cases, the secret is based upon a Physically Uncloneable Function . This value is revealed to the OEM board manufacturer only via a secure channel. Upon first boot, the system (within a TEE, a TPM, or Secure Element) will generate a key pair using the same seed to initialize a Pseudo-Random-Number-Generator (PRNG). The OEM, in a separate system, will initialize the same PRNG and generate the same key pair. The OEM then derives the public key part, signs it and turns it into a certificate. The private part is then destroyed by the OEM, ideally never stored or seen by anyone. The certificate (being public information) is placed into a database, in some cases it is loaded by the device as its IDevID certificate, in other cases, it is retrieved during the onboarding process based upon a unique serial number asserted by the device. In some ways, this method appears to have all of the downsides of the previous two methods: the device must correctly derive its own private key, and the OEM has access to the private key, making it also vulnerable. However, the OEM can do all of the private key manipulation in a secure place, offline, and never involve the actual physical factory. The security of the process rests upon the difficulty in extracting the seed provided by the Silicon-OEM. The Silicon-OEM must operate a factory that is more secure, but this removes much of the security concerns for the OEM's factory. Additionally, there are some other advantages to the OEM: The private keys and certificates may be calculated by the OEM asynchronously to the manufacturing process, either done in batches in advance of actual manufacturing, or on demand when an IDevID is demanded. There are downsides of this method for OEM: the cost is often higher, and may involve additional discrete parts. The security has been outsourced to the OEM-silicon fabrication system. The resulting seeds must be communicated to the OEM in batches, and they OEM must store and care for these keys very carefully.

Public Key Infrastructures (PKI) describes the format for certificates, and numerous mechanisms for doing enrollment have been defined (including: EST , CMP , SCEP ). provides mechanisms to deal with multi-level certification authorities, but it is not always clear what operating rules apply. The certification authority (CA) that is central to -style public key infrastructures can suffer three kinds of failures:

disclosure of a private key,
loss of a private key,
inappropriate signing of a certificate from an unauthorized source.

A PKI which discloses one or more private certification authority keys is no longer secure. An attacker can create new identities, and forge certificates connecting existing identities to attacker controlled public/private keypairs. This can permit the attacker to impersonate any specific device. There is an additional kind of failure when the CA is convinced to sign (or issue) a certificate which it is not authorized to do so. See for instance . This is an authorization failure, and while a significant event, it does not result in the CA having to be re-initialized from scratch. This is distinguished from when a loss as described above renders the CA completely useless and likely requires a recall of all products that have ever had an IDevID issued from this CA. If the PKI uses Certificate Revocation Lists (CRL)s, then an attacker that has access to the private key can also revoke existing identities. In the other direction, a PKI which loses access to a private key can no longer function. This does not immediately result in a failure, as existing identities remain valid until their expiry time (notAfter). However, if CRLs or OCSP are in use, then the inability to sign a fresh CRL or OCSP response will result in all identities becoming invalid once the existing CRLs or OCSP statements expire. This section details some nomenclature about the structure of certification authorities.

Number of levels of certification authorities (pkilevel) Section 6.1 of provides a Basic Path Validation. In the formula, the certificates are arranged into a list. The certification authority (CA) starts with a Trust Anchor (TrAnc). This is counted as the first level of the authority. In the degenerate case of a self-signed certificate, then this a one level PKI. The private key associated with the Trust Anchor signs one or more certificates. When this first level authority trusts only End-Entity (EE) certificates, then this is a two level PKI. When this first level authority signs subordinate certification authorities, and those certification authorities sign End-Entity certificates, then this is a three level PKI. In general, when arranged as a tree, with the End-Entity certificates at the bottom, and the Trust Anchor at the top, then the level is where the deepest EE certificates are, counting from one. It is quite common to have a three-level PKI, where the root (level one) of the CA is stored in a Hardware Security Module in a way that it cannot be continuously accessed ("offline"), while the level two subordinate CA can sign certificates at any time ("online").

Protection of CA private keys The private key for the certification authorities must be protected from disclosure. The strongest protection is afforded by keeping them in a offline device, passing Certificate Signing Requests (CSRs) to the offline device by human process. For examples of extreme measures, see . There is however a wide spectrum of needs, as exampled in . The SAS70 audit standard is usually used as a basis for the Ceremony, see . This is inconvenient, and may involve latencies of days, possibly even weeks to months if the offline device is kept in a locked environment that requires multiple keys to be present. There is therefore a tension between protection and convenience. Convenient and timely access to sign new artifacts is not something that is just nice to have. If access is inconvenient then it may cause delays for signing of new code releases, or it may incentivize technical staff to build in work arounds in order that they can get their job done faster. The compromise between situations is often mitigated by having some levels of the PKI be offline, and some levels of the PKI be online.

Preservation of CA and Trust Anchor private keys A public key (or certificate) is installed into target device(s) as a trust anchor. Is it there in order to verify further artifacts, and it represents a significant investment. Trust anchors must not be easily replaced by attackers, and securing the trust anchor against such tampering may involve burning the trust anchor into unchangeable fuses inside a CPU. Replacement of the anchor can involve a physical recall of every single device. It therefore important that the trust anchor is useable for the entire lifetime of every single one of the devices. The previous section deals with attacks against the infrastructure: the attacker wants to get access to the private key material, or to convince the infrastructure to use the private key material to their bidding. Such an event, if undetected would be catastrosphic. But, when detected, would render almost every device useless (or potentially dangerous) until the anchor could be replaced. There is a different situation, however, which would lead to a similiar result. If the legitimate owner of the trust anchor infrastructure loses access the private keys, then an equally catastrophic situation occurs. There are many situations that could lead to this. The most typical situation would seem to be some kind of physical damage: a flood, a fire. Less obvious situations could occur if a human forgets a password, or if the human with the password(s) dies, or becomes incapacited. Backups of critical material is routinely done. Storage of backups offsite deals with physical damage, and in many cases the organization maintains an entire set of equipment at another location. The question then becomes: how are the backups unlocked, or activated. Why attack the primary site physically if an attacker can target the backup site, or the people whose job it is to activate the backup site? Consider the situation where a hurricane or earthquake takes out all power and communications at an organizations' primary location, and it becomes necessary to activate the backup site. What does it take to do that? Typically the secrets will be split using into multiple pieces, each piece being carried with a different trusted employee. In , the pieces are stored on smartcards which are kept in a vault, and the trusted people carry keys to the vault. One advantage of this mechanism is that if necessary, the doors to the vault can be drilled out. This takes some significant time and leaves significant evidence, so it can not be done quietly by an attacker. In the case of the DNSSEC Root, a failure of the vault to open actually required this to be done. In other systems the digital pieces are carried on the person themselves, ideally encrypted with a password known only to that person. allows for keys to be split up into n-components, where only some smaller number of them, k, need to be present to reconstruct the secret. This is known as a (k, n) threshold scheme.

Secret splitting, k-of-n In this document, each of the people who hold a piece of the secret are referred to as Key Executives. The choice of n, and the choice of k is therefore of critical concern. It seems unwise for an organizations to publish them, as it provides some evidence as to how many Key Executives would need to be coerced. The identities of the n Key Executive should also be confidential. The list of who they are should probably be limited to the members of the board and executive. There does not seem to be any particular reason for the Key Executives to be members of the board, but having a long term relationship with the enterprise seems reasonable, and a clear understanding of when to use the piece. The number k, which is the minimum number of people that would need to be coerced should also remain confidential. A number that can be published is the difference between k and n, which represents the number of redundant Key Executives that exist. An enterprise that has operations in multiple places may be better positioned to survive incidents that disrupt travel. For instance, an earthquake, tsunami, or pandemic not only has the possibility to kill Key Executives or the smartcard or USB key that they are stored on. suggests that n=2k-1, which implies that a simple majority of Key Executives are needed to reconstruct the secret, other values of k have some interesting advantages. A value of k set to be less than a simple majority, where the Key Executives are split between two or more continents (with each continent having at least k Key Executives) would allow either continent to continue operations without the other group. This might be a very good way to manage a code signing or update signing key. Split it among development groups in three time zones (eight hours apart), such that any of those development groups can issue an emergency security patch. (Another way would be to have three End-Entity certificates that can sign code, and have each time zone sign their own code. That implies that there is at least a level two PKI around the code signing process, and that any bootloaders that need to verify the code being starting it are able to do PKI operations)

Supporting provisioned anchors in devices IDevID-type Identity (or Birth) Certificates which are provisioned into devices need to be signed by a certification authority maintained by the manufacturer. During the period of manufacture of new product, the manufacturer needs to be be able to sign new Identity Certificates. During the anticipated lifespan of the devices the manufacturer needs to maintain the ability for third parties to validate the Identity Certificates. If there are Certificate Revocation Lists (CRLs) involved, then they will need to re-signed during this period. Even for devices with a short active lifetime, the lifespan of the device could very long if devices are kept in a warehouse for many decades before being activated. Trust anchors which are provisioned in the devices will have corresponding private keys maintained by the manufacturer. The trust anchors will often anchor a PKI which is going to be used for a particular purpose. There will be End-Entity (EE) certificates of this PKI which will be used to sign particular artifacts (such as software updates), or messages in communications protocols (such as TLS connections). The private keys associated with these EE certificates are not stored in the device, but are maintained by the manufacturer. These need even more care than the private keys stored in the devices, as compromise of the software update key compromises all of the devices, not just a single device.

Evaluation Questions This section recaps the set of questions that may need to be answered. This document does not assign valuation to the answers.

Integrity and Privacy of on-device data

initial-enclave-location:: Is the location of the initial software trust anchor internal to the CPU package? Some systems have a software verification public key which is built into the CPU package, while other systems store that initial key in a non-volatile device external to the CPU.
initial-enclave-integrity-key:: If the first-stage bootloader is external to the CPU, and if it is integrity protected, where is the key used to check the integrity?
initial-enclave-privacy-key:: If the first-stage data is external to the CPU, is it kept confidential by use of encryption?
first-stage-exposure:: The number of people involved in the first stage initialization. An entirely automated system would have a number zero. A factory with three 8 hour shifts might have a number that is a multiple of three. A system with humans involved may be subject to bribery attacks, while a system with no humans may be subject to attacks on the system which are hard to notice.
first-second-stage-gap:: how far and long does a board travel between being initialized with a first-stage bootloader to where it is locked down so that changes to the bootloader can no longer be made. For many situations, there is no distance at all as they occur in the same factory, but for other situations boards are manufactured and tested in one location, but are initialized elsewhere.

Integrity and Privacy of device identify infrastructure For IDevID provisioning, which includes a private key and matching certificate installed into the device, the associated public key infrastructure that anchors this identity must be maintained by the manufacturer.

identity-pki-level:: referring to , the level number at which End-Entity certificates are present.
identity-time-limits-per-subordinate:: how long is each subordinate CA maintained before a new subordinate CA key is generated? There may be no time limit, only a device count limit.
identity-number-per-subordinate:: how many identities are signed by a particular subordinate CA before it is retired? There may be no numeric limit, only a time limit.
identity-anchor-storage:: how is the root CA key stored? An open description that might include whether an HSM is used, or not, or even the model of it.
identity-shared-split-extra:: referring to , where a private key is split up into n-components, of which k are required to recover the key, this number is n-k. This is the number of spare shares. Publishing this provides a measure of how much redundancy is present while not actually revealing either k or n.
identity-shared-split-continents:: the number of continents on which the private key can be recovered without travel by any of the secret share holders

Integrity and Privacy of included trust anchors For each trust anchor (public key) stored in the device, there will be an associated PKI. For each of those PKI the following questions need to be answered.

pki-level:: how deep is the EE that will be evaluated, based upon the criteria in
pki-algorithms:: what kind of algorithms and key sizes can actively be used with the device.
pki-lifespan:: what is the timespan for this anchor. Does it get replaced at some interval, and if so, by what means is this done?
pki-level-locked:: (a Boolean) is the level where the EE cert will be found locked by the device, or can levels be added or deleted by the PKI operator without code changes to the device.
pki-breadth:: how many different non-expired EE certificates is the PKI designed to manage?
pki-lock-policy:: can any EE certificate be used with this trust anchor to sign? Or, is there some kind of policy OID or Subject restriction? Are specific subordinate CAs needed that lead to the EE?
pki-anchor-storage:: how is the private key associated with this trust root stored? How many people are needed to recover it?

Privacy Considerations many yet to be detailed

Security Considerations This entire document is about security considerations.

IANA Considerations This document makes no IANA requests.

Acknowledgements Robert Martin of MITRE provided some guidance about citing the SBOM efforts. Carsten Borman provides many editorial suggestions.

Changelog