Internet Protocol version 11

Introduction IPv6 has been routing packets by forwarding packets to gateways after gateways until it reaches its destination network . BGP Networks seem to be working on a bus or Ring topology network. This happened because IPv6 addresses were bland and had no networking information in them. We plan to right these wrongs with IPv11. A 128 bit address with 24 bit chunks ancestors and host. Since 24 chunks means just 16,777,216 clients per child network or hosts so they are easy to manage.

Requirements Language The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 when, and only when, they appear in all capitals, as shown here.

IPv11 The Internet Protocol Version 11

Address Format The format for an IPv11 address starts with an Octet and its value is a constant hexadecimal number 0x0B which tells the device that it is an IPv11 IP address. The next 24 bits is the first ancestor of the ip address.If any ancestor is 0x000000 it means there is no network assigned to this part of the network address. The next 24 bits are its child network of the client address.The next child (network network )is 24 bits and so on until the last 24 bits. The host ip address is always the last 24 bits of the IP address .IPv11 IP address is of the format: 0BXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXHH:HHHH.

	IP Address
Host Part of address	0BXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXHH:HHHH
Parent network address, network address and child network address of host	0BPP:PPPP:NNNN:NNCC:CCCC:XXXX:XXXX:XXXX
Parent network address, network address and child network address of host	0BXX:XXXX:PPPP:PPNN:NNNN:CCCC:CCXX:XXXX

IPv11 Assignment IP addresses are assigned sequentially to network AA(autonomous authorities) starting at the first address from the last 24bit child network i.e. the first network address is 0B::100:0000.

	IP Address
First network to assign	0B::100:0000
Last network to assign	0BEF:FFFF:FFFF:FFFF:FFFF:FFFF:FF00:0000

Broadcast address Any network can be broadcasted to by filling in the ancestor part of the address and masking the rest part of the networks (and host address) with the value F . This will send data to child network AAs (or host). An example of a broadcast address is 0BXX:XXXX:FFFF:FFFF::FFFF:FFFF:FFFF:FFFF this will broadcast to next 16,777,216 child networks of OBXX:XXXX:: network

	IP Address
Broadcast address of first network	0B::1FF:FFFF
Broadcast address of last network	0BEF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF

Routing Routing is accomplished by first finding how many 24 bits match in the source and the destination IP address. Then querying child AA’s for the next 24 bit address.this process is repeated for every network. Each AA’s network tables contain all known immediate children (a max of 16777216) the best route to the next child network in the path. Routes can be optimized later by lookin for shortcut pathways to networks on route to the destination. This can be accomplished by looking for matching sibling gateways to child networks in the pathway to the destination